Jinzhou City Shitan Machinery Equipment CO. LTD.
Jinzhou City Shitan Machinery Equipment CO. LTD.
Add to Cart
BW - 160 / 10 Triplex Piston Mud Pump Optional Model For Drilling Rigs
Product Description
BW160/10 grouting pump is a horizontal three cylinder reciprocating single acting piston pump. It has four kinds of flow rate and pressure and the range of flow and pressure are large. The pump has compact structure, light weight, long working life, easy operation. It’s flexible, reliable and has many common standard parts.
Product Specifications
| MODEL | BW-160/10 |
| TYPE | Horizontal, Triplex, Single Acting Reciprocating pump |
| STROKE (mm) | 70 |
| LINER DIA. (mm) | 70 |
| STROKES (min-1) | 200 132 83 55 |
| DISPLACEMENT (L/min) | 160 107 67 44 |
| PRESSURE (Mpa) | 2.5 4 6.5 10 |
| INPUT POWER (kW) | 11 |
| SUCTION PIPE DIA. (mm) | 51 |
| DISCHARGE PIPE DIA.(mm) | 25 |
| DRILLING HOLE DEPTH | Diamond Core Drilling <1000m |
| DIMENSION (mm) | 1400X850X950 |
| WEIGHT | 480KG |
Product Advantages
1. Compact structure, light weight, small size, beautiful appearance, can be driven by hydraulic motor, motor and diesel engine;
2. In the design, we should adopt new concepts, new structures, new materials and new processes;
3. Improve the standardization, serialization and generalization of the horizontal pump body, crankshaft, connecting rod, crosshead, pump head and some other related parts as far as possible, and reduce the types of other parts;
4. The wearing parts have long service life and high reliability.
5 .Horizontal Three Cylinder Piston Grouting Pump.
6. Electricity, Diesel Driven or Unpowered Machine Optional.
7. Stable Output, High Pressure and Great Grout Injection Performance.
8. High Quality and Compact Structure, Easy to Install, Operate, Move and Maintain.
Precautions for BW 160 mud pump
1. After the sediment pump is fixed at the work site, check whether the main shaft of the prime mover and the main shaft of the pump are on the same axis, and make accurate adjustment if they are different.
2. The inlet and outlet water pipes of the pump shall be supported to prevent the pipeline gravity from being imposed on the pump body. The pipeline installation shall extend outward from the pump inlet and outlet flanges, and the support and positioning shall be done immediately.
3. When the sediment pump is working, high-pressure clean water must be injected into the packing chamber to protect the shaft seal assembly. Do not shut down the high-pressure clean water pump when the main pump is working normally. The clean water pressure should be greater than the working pressure of the sediment pump. The packing chamber assembly will wear quickly without high-pressure water protection.
4. The suction head in the pump performance table refers to the anti-cavitation characteristics of the pump under the condition of clean water at normal temperature. When pumping sediment, the inlet pressure of the pump should be positive as much as possible. When the sediment contains large solid particles, the flow head of the pump will also be affected, and the medium conditions should be considered during the selection.
5. When replacing vulnerable parts such as impeller and liner, the clearance between impeller and front and rear liner should be adjusted. The axial clearance between impeller and liner has a great impact on the performance and service life of the pump.
6. Please fill the bearing with lubricating grease in time.
7. In case of abnormal vibration, noise and excessive bearing temperature rise during the operation of the pump, stop the pump immediately for inspection.
Mud Pump FAQ
1.Q: What is the guarantee period of grouting equipment?
A: It is one year count from one month after shipping date except wearing parts. We will send some wearing parts of machine when delivery.
2.Q: What is your project with grouting equipment?
A: Waterproofing,Floor restoration,Metal door and window frames, Sealing joints, Connecting prefabricated concrete sections, Filling voids and eliminating holes in concrete blocks, Tiling, Levelling sidewalk slabs or Manhole and sewer linings.
3.Q: What is the output of grouting injection pump do you need?
A: Our hot model grouting pump output is from 5-10m3/h, but there are also other series with different output for your choice or custom it as per your request.
4.Q: What is pressure of grouting pump do you need?
A: Our cement grouting pump pressure is 0-10Mpa, but there are also other series with different pressure for your choice or custom it as per your request.
5.Q: What is your local voltage?
A: In China, it is 3phase, 380V,50Hz. We also can change it to your local voltage.
6.Q: What is the after-sales service?
A: We could supply wear parts together with machine when delivery. The operation video and instruction file will send to you once you buy our machine.When using the machine, if you have some questions, our engineer also can guide you through the video to help you to solve the problem.
