Jinzhou City Shitan Machinery Equipment CO. LTD.
Jinzhou City Shitan Machinery Equipment CO. LTD.
Add to Cart
Construction Exploration Deep Borehole 200 Meters GK 200 Water Well Drilling Rig Machine
Product Description
It is widely used for Water well drilling, Geological Exploration and Prospecting, Geothermal wells, Blast-hole, Irrigation projects, etc.. High-way and building construction foundation drilling, genetal survey. Geophysical exploration and blast hole drilling
Technical Specification
| ST-200 Drilling Rig | |||
| Drill | Swivel Head | ||
| Drilling depth
| Max.200m | Spindle speed
| (4-speed) 115 230 505 1010r/m |
| Hole diameter
| Max.300m | Spindle stroke | 450kmm |
| Drill rod diameter | 42mm | Spindle pull-down | Max.15KN |
| Angle range | 90-75 | Spindle lifting capacity | Max. 25KN |
| Oil pump | Water pump | ||
| Model | YBC-20/125 | Model | Horizontal reciprocating single-acting piston pump |
| Rated pressure | 12.5Mpa | Working pressure | Max. 1.2Mpa |
| Flow speed | 20ml/r | ||
| Rated speed | 2000r/min | ||
| Hoist | Power(diesel) | ||
| Max. lifting capacity | 20KN | Model(diesel engine | ZS1115 |
| Hoisting drum revolution | 20.39.85.170r/m | Rated power | 16.2KW |
| Drum diameter | 140mm | Rated speed | 2200r/m |
| WEIGHT | AROUND 600KG | ||
| SIZE | 1730*860*1360mm | ||
Product Advantages
1. Hydraulic feeding mechanism can improve drilling efficient,reducing labor work
2. The rig equipped with a ball on a cassette holding mechanism and a six driving drill pipe.double guide,the drilling rod can be replaced without shutdown ------------high efficient,convenient operation,safe and reliable
3. Equipped with hole bottom pressure indicator, you can know the situation inside the hole
4. The drilling machine has the advantage of compact structure,small volume, light weight,convenient move, suit for mountain and plain areas.
Instructions for use of drilling and coring machine
1) To ensure safe and normal operation, read the instructions before use, and get familiar with the structure and use of the drill. 2) After the drilling rig moves to the position where it needs to work, swing the traveling wheel 180 degrees backward, and operate the handle to make the traveling wheel and the steering wheel leave the ground. Adjust the four adjusting bolts to make the base firmly on the working position. At this time, the base plane is off the ground. 3) Wipe the drill column and lifting screw, and adjust the spindle position. 4) Connect the water pump to the water source and add water to the bucket to ensure that the water pump can supply water normally. 5) Install the upper drill bit. 6) Check and adjust all parts of the engine according to the requirements of the gasoline engine operation manual. If the engine is in normal condition, the engine can be started. Start drilling and coring.
